Product Description

Amongst the most compact on the market, our Spark II wood stove can heat ​​up to 1,200 ft² with a maximum heat output of 45,000 BTU/h. Non-catalytic and EPA certified at 1.8 g/h, this model can efficiently heat small spaces. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus to be able to empty them much less frequently. Packaged in a rigid cardboard box for ease of transport, this appliance requires simple assembly.

Included: steel legs, air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper

  • Up to 5 hours burn time
  • Up to 17" logs
  • 1.55 ft³ firebox
  • EPA certified
  • Proudly made in Canada
  • Limited lifetime warranty
  • Certified for mobile home and alcove installation

Options: blower, thermodisc, firescreen, fresh air intake kit

 

Heating area 250 - 1,200 Ft2
Size 18 1/2" W X 28 7/8" D X 28 3/4" H
Maximum log length 17"
Average particulate emissions rate (1)

1.8 g/h

 

 

Appliance performance (2)

Fuel type Dry cordwood (16" recommended)
Recommended heating area-ft² () 250 - 1,200
Overall firebox volume-ft³ 1.7
EPA loading volume-ft³ 1.55
Maximum burn time () 5 h
Maximum heat output-dry cordwood (3) 45,000 BTU/h (13.19 kW)
Overall heat output rate < (3) (4) 12,124 BTU/h (3.55 kW) to 26,700 BTU/h (7.83 kW)
Average overall efficiency (dry cordwood) (4) 74 % (HHV) (5) 79 % (LHV) (6)
Optimum efficiency (7) (8) 80 %
Optimum heat transfer efficiency (9) 79 %
Average particulate emissions rate (1) 1.8 g/h
Average CO (10) 74 g/h

(1) This appliance is officially tested and certified by an independent agency.

(2) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(3) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(4) As measured per CSA B415.1-10 stack loss method.

(5) Higher Heating Value of the fuel.

(6) Lower Heating Value of the fuel.

(7) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(8) Optimum overall efficiency at a specific burn rate (LHV).

(9) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

(10) Carbon monoxyde.

 

Wood stove manual | Safety notifications & general information
(PDF - 3.6 Mo)Spark II stove install & owner's manual
(PDF - 4.1 Mo)Spark II stove dimensions
(PDF - 0.2 Mo)

 

 

General features

Combustion technology Non-catalytic
High-efficiency certified appliance Yes, EPA 2020 approved
Maximum log length 17"
Log positioning Loading over depth
Chimney diameter 6"
Flue outlet diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet) 12'
Baffle type High quality vermiculite
Approved for an alcove installation Yes
Approved for a mobile home installation Yes, with fresh air intake
Shipping Weight 235 lb (107 kg)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 10 1/4" X 8 1/2"
Glass air-wash system Yes
Overall dimension (Height) 28 3/4"
Overall dimension (Width) 18 1/2"
Overall dimension (Depth) 28 7/8"
Door opening – dimension (Height) 7 5/8"
Door opening - dimension (Width) 12"
Firebox – dimension (Height) 11 3/4"
Firebox – dimension (Width) 14 1/4"
Firebox – dimension (Depth) 19 1/8"
Firebox lined with refractory bricks for better heat distribution Yes
Stainless-steel secondary-air system improving gas combustion Yes
Steel thickness – body 3/16"
Steel thickness – top 1/4"
USA standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, UL 737
Canadian standard (safety) ULC S627
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime
Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
  Canada United-States
  Single wall pipe Double wall pipe Single wall pipe Double wall pipe
Clearance – back wall 14" 6" 12" 6"
Clearance - corner 11" 7" 11" 7"
Clearance – side wall 18" 18" 18" 18"
Clearance – top (measured from the platform on which the appliance is installed)** 84" 84" 84" 84"

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

Customer Reviews

Similar Products

Customers also bought

    Complementary products

      • ITEM BAR TITLE

        Share shipping, delivery, policy information.

      • ITEM BAR TITLE

        Share shipping, delivery, policy information.

      • ITEM BAR TITLE

        Share shipping, delivery, policy information.

      • ITEM BAR TITLE

        Share shipping, delivery, policy information.